[vc_row][vc_column][vc_column_text]SikaCeram\u00ae Tile Adhesive KH
\nPrepacked cementitious tile adhesive
\nDESCRIPTION
\nSikaCeram\u00ae-88 Tile Adhesive KH is a prepacked cementitious tile adhesive. The product is ideal for installing ceramic tiles, homogeneous tiles. SikaCeram\u00ae-
\n88 Tile Adhesive KH can be used as thin bed or thick
\nbed adhesive for floor and wall tiling works and is suitable for internal.
\nUSES
\nSuitable for fixing:
\n\u25aa Wall and floor tiles
\n\u25aa Ceramics tiles
\n\u25aa Porcelain tiles
\n\u25aa Absorbing tiles
\n\u25aa Interior use only
\nCHARACTERISTICS \/ ADVANTAGES
\n\u25aa Good damp and fungi resistance.
\n\u25aa Factory mixed \u2013 consistent quality.
\nBetter workability. Saves time installation and material cost.
\n\u25aa
\nTile can be adjusted up to 20 minutes after application.
\n\u25aa
\nFlexible use for many items, many different requirements.
\n\u25aa
\nSoaking of tiles in water before installation is not required.
\n\u25aa
\nPRODUCT INFORMATION
\nPackaging 20 kg \/ bag
\nAppearance \/ Colour Powder \/ Grey
\nShelf life Min 9 months if stored properly in unopended, original packaging.
\nStorage conditions Dry, cool and shaded place.
\nDensity 1.49 kg\/l (bulk density of powder)
\nTECHNICAL INFORMATION
\nTensile adhesion strength \u2265 0.5 N\/mm\u00b2 (on prepared, dampened concrete surface)
\nISO 13007-2:2005 TCVN 7899-2:2008
\nCompressive strength ~10 N\/mm\u00b2 (28 days)
\nASTM C349-08
\nAPPLICATION INFORMATION
\nMixing ratio Approx 4.5 – 5 L of clean water per 20 kg bag
\n1 \/ 2
\nConsumption Consumption is always dependent on the substrate surface profile and
\nroughness, the size of the tiles and the joints between them, as well as on
\nthe application technique (single adhesive layer on the substrate, or with
\nan additional \u2018buttering\u2019 layer on the back of the tiles as recommended for
\ntiles larger than 30 x 30 cm).
\nCoverage: ~5.6 – 6.4m\u00b2 per 20 kg bag (based on 2 mm mortar thickness).
\nSubstrate temperature Minimum 8\u00b0C
\nMaximum 40\u00b0C
\nPot Life ~60 minutes (at 27\u00b0C\/ 65% r.H).
\nAdjustability time ~20 minutes.
\nCuring time \u25aa For wall – after 7 to 8 hours (depending on temparature).
\n\u25aa For floor \u2013 after 24 hours.
\n\u25aa Open to full traffic \u2013 after 14 days.[\/vc_column_text][\/vc_column][\/vc_row]<\/p>\n","protected":false},"excerpt":{"rendered":"